GT1810A

Description

The GT1810A is back to back double cartridge seal designed for operation with a pressurized barrier fluid (1 bar > than process pressure).
The seal has the addition of an integrated self-aligning roller bearing to minimise shaft run-out. This robust, tried and tested design is available constructed from materials selected according to the specific operting conditions. The GT1820A variant is also available with dimensions compliant with DIN 28138 (flange) and DIN 28159 (shaft)

• Robust drive lugs that can tolerate run-out and vibration.
  
• Robust, carefully designed seal rings.
  
• FLUIGAM: product side PTFE energized gasket.
  
• Retained stationary ring to prevent blow out durign reverse pressure.
  
• Optional: sanitary flange to prevent product contamination and cooling flange for high temperature applications.
  
• Double seal with single piece body to reduce axial lenght.
  
• Multiple springs outside the product for uniform load on the seal faces.
  
• Optional thermocouple for ATEX solutions.
  
• Bearing protection rings to contain lubrication.
  
• Positioning device for easy, precise installation.
  
• Drive collar designed to prevent locking screws damaging the shaft.
  
• Ball or roller bearing to ensure minimum seal run-out.
  
• Atmosphere leakage monitoring connection.
  
• Flushing connections designed to ensure air is always vented.

(*) Inch dimensions are available upon request.
The maximum values are determined by the specific combination of operating conditions.
For further details, please contact us.

Additional information