SDP12 (Plan 52-53 12lt)

Description

12 liters reservoir (Fluiten code SDP012) can be used in two different configurations, based on the characteristics of the process fluid: Plan 52 or Plan 53A. Plan 52 (reservoir at atmospheric pressure) is suitable where a reduced emissions are accepted, while Plan 53A (pressurized reservoir) has to be considered when process fluid emission to atmosphere are not accepted (see Fluiten technical seminar).

• Reservoir in AISI 316, for high corrosion resistance, even on heavy duty services.
• Modular design: optional instrumentation available on request.
• Integrated pipes for cooling water connection.
• MAWP: 16 bar g.
• MAWT: 200 °C.

• Sized to remove heat generated by the seal faces through flushing fluid circulation, ensuring proper lubrication of the sealing surfaces.
• Reduction of process fluid emissions to the atmosphere (Plan 52): hazardous services, where emissions must be limited.
• No emission of process fluid to the atmosphere (Plan 53A): toxic services where emissions are not allowed.

CAUTION!
For Plan 53A solution, it is necessary to check the availability of nitrogen in the plant at a pressure 1-2 bar higher than the maximum stuffing box pressure. Fluiten can suggest the type of flushing fluid.

Additional information