CB3S
Single balanced seal with reinforced sleeve.
COMPONENT KEY
1. Solid stationary ring
2. Solid rotating ring
9. Rotating ring gasket
10. Stationary ring gasket
11. Product side sleeve gasket
13. Spring
24. Flange gasket
“N” NPT: auxiliary liquid inlet/outlet connections
- Description
- Features
- Operating limits
- Additional information
Description
Single cartridge seal with double hydraulic balancing and springs outside the product. Designed for use in medium pressure and temperatures. Installation is made easy with the new Fluistrip positioning device and the flange slots which adapt to different stuffing boxes. The reinforced sleeve tolerates higher shaft run-out and adapts to mixers, dryers, mills and also to assembly directly onto the pump shaft.
- Sliding drive device compensates for any movement and mantains contact with the rotating ring.
- Threaded flushing connections from pump discharge (PLAN11) or flushing from an external source (PLAN32).
- Fluistrip: positioning device for correct and easy installation, to be pulled off after assembly but before starting-up the machine.
- Slotted flanges for more flexible mounting.
- Springs outside the product.
- Thicker sleeve to tolerate high run-out values to prevent deformations during maintenance and assembly.
| DIAMETER | SPEED | PRESSURE | TEMPERATURE |
|---|---|---|---|
| 20-90 (mm)* | 0-12 (m/sec) | Vacuum ÷ 25 (bar g) | -50 ÷ 250 (°C) |
(*) Inch dimensions are available upon request.
The maximum values are determined by the specific combination of operating conditions.
For further details, please contact us.
Additional information
| Category | CB3/4 (Fluicart), Mixer Mechanical Seals |
|---|---|
| Market | Chemistry, Energy, Petrochemical, Pharmaceutical & Food, Water treatment |
| Application | |
| Certification | 3.1, ATEX, CE1935-2004, F.D.A. |
